RadiantDirect.com
Hannel Enterprises, Inc.


 

The Prestige Boilers Qualify for the 30% Fed Tax Credit in 2009/10  - follow this link for more information


The Triangle Tube Prestige family of radiant heat boilers offers all the benefits of the new generation of high-efficiency, modulating, condensing boilers along with easy installation, low maintenance and high reliability for efficient radiant floor heating. With models rated at 110, 175 and 250 KBTU input, the Prestige boiler family covers a broad range of heat load requirements. When paired with an indirect water tank, our Prestige boilers can heat your house and provide all the domestic hot water you will need.

Compact, condensing, modulating

Prestige boilers are designed to be wall-mounted, reducing space requirements and improving access for installation and maintenance.


Condensing boilers like the Prestige trap and recover heat from the exhaust that would otherwise be lost up the chimney. While traditional radiant heat boilers operate in the 80% efficiency range, the Prestige line has an AFUE rating of 93%. The higher efficiency means lower fuel consumption/cost. It also means a more efficient radiant floor heating system and lower exhaust temperature. The Prestige boilers do not require expensive stainless steel venting pipe in a chimney through the roof. Instead they can be vented with ABS or PVC directly through a side wall.

Depending on the model, the Triangle Tube Prestige burner system modulates its burn rate to 30% or less of the maximum input rating. So, a Prestige Solo 110 natural gas boiler will range between 30MBH and 110MBH. By matching the burn rate to only what is required to satisfy the heat load, fuel consumption is greatly reduced versus traditional boilers that burn either on or off.

Triangle Tube Prestige boilers also reduce fuel consumption via their outdoor reset feature. While measuring temperature changes outside, the boiler automatically adjusts the target water temperature coming out of the boiler to maximize efficiency.


It’s the heat exchanger!

Most of the other condensing boilers on the market use the same heat exchanger design. The Prestige heat exchanger is unique.
No O-ring to wear out/fail
Higher water content:
reduced hotspots/over heating risk
lowers sensitivity to water flow variation
easier temperature control
Vertical alignment and baffle system is self cleaning:
Reduces sludge build-up, lowers maintenance
Maintains efficiency over time
Low pressure drop means less head pressure, smaller pump requirements and/or more flow
One of the most reliable radiant heat boilers for efficient radiant floor heating
This superior design provides you with a heat source that you can install with confidence that it will run at peak efficiency for many years with minimal maintenance.

Not a Boiler-in-a-Box

All boilers require a plumbing “trim kit” to insure proper flow to and from the boiler.

Triangle Tube’s warranty requires that an “experienced and qualified heating mechanic” complete the installation. Prior to purchase you should identify someone who can make the gas hookups, fire off the boiler, perform combustion analysis and make necessary adjustments.